Photograph Of Stainless Steel Plates in Mumbai

304 HR Stainless Steel Plate, SS 304 HR Steel Plate, ASTM A240 TP304 HR Plate, ASME SA240 TP304 HR Plate, 304 Quality Stainless Steel Plates

304 HR Stainless Steel Plate, Sheets and Coils in Hot Rolled (HR) and Cold Rolled (HR) Conditions No.1 Finish, No.2 Finish, No.2B Finish, No. 8 Finish, BA Finish (Bright Annealed), Satin Finish, Hairline Finish.

304 hr Stainless Steel Plate is one of the most versatile and commonly used stainless steels on the market, Grade 304 hr stainless steel is the most standard used alloy of this type. Essentially, Grade 304 hr is an austenitic chromium alloy which is also known as an "18/8" stainless as the make-up of the steel is 18% chromium and 8% nickel.

The chromium content promotes the material's considerable resistance to the effects of corrosion and oxidation. The stainless steel alloy resists most oxidizing acids and will withstand ordinary rusting though this does not mean that the steel will not tarnish over time. The steel needs to be cold worked to generate higher tensile strength. For stainless steel sections which are welded heavily, post-weld annealing may be necessary to provide maximum corrosive resistance.

Type 304 hr and Type 304 hrL have very similar chemical and mechanical properties and are often included on a single material test certificate when the actual properties of a stainless steel plate meet the hriteria of both types. This is a very common occurrence. Type 304 hrL is a variation of Type 304 hr and has a lower carbon content which improves weldability and lowers the risk of reduced corrosion resistance around the weld. Type 304 hrL also has a slightly lower yield and tensile strength than Type 304 hr.


As with most steel plate products a number of different designations are used for these steels. The most common are:

  • Type 304 hr              1.4301 (EN Steel Number)            S304 hr00 (UNS) 
  • Type 304 hrL            1.4307 (EN Steel Number)            S304 hr03 (UNS)


Philips Metal is specialist distributor, processor and supplier of stainless steel sheets in grade 201, 304 hr, 304 hrL, 316L, 409, and 430 stainless steels in all finishes. We are suppliers of ASTM A240 Stainless Steel 304 hr/304 hrL Sheets made by world’s leading mills, such as Jindal Stainless Ltd., Outokumpu, POSCO, DKC- Korea, European Mills, NTK- Japan, TISCO, Aperam and others. We can supply cut to size ASTM A240 Stainless Steel 304 hr/304 hrL Sheets, with both narrow and wide widths.

  • Order Large or Small Quantity of ASTM A240 Stainless Steel 304 hr Sheets
  • Cut to Size ASTM A240 Stainless Steel 304 hr Sheets Available
  • No Minimum Order Quantity


Categories: Stainless Steel, Stainless Steel 304 hr/304 hrL, Steel Plates, Steel Sheets Tags: 1.4301, 1.4307, 2B Finish, 8K Finish, Dealers, Distributors, Exporters, Jindal Stainless, Manufacturer, Mirror Finish Sheets, No.1 Finish, No.4 Finish, No.8 Finish, S304 hr00, S304 hr03, Stainless Steel 304 hr Sheets, Stainless Steel 304 hrL Sheets, Stainless Steel Sheet Suppliers, Stainless Steel Sheets, Suppliers

ASTM A240 Stainless Steel Sheets Specification

Specifications : ASTM A240 / ASME SA240

Item : Stainless Steel Sheets (Hot rolled, cold rolled)

Standard : JIS, AISI, ASTM, GB, DIN, EN, etc

Surface : the surface and finish of stainless steel Sheets: 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc

Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc

Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc

Manufacturer : POSCO, Aperam, Jindal Stainless, DKC Korea, Thyssenkrup, Baosteel, TISCO, Arcelor Mittal, VDM, Nippon Metal, Outokumpu

Thickness : 0.3~10.0mm

Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)

End : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

Grade : SS 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309, 310S, 317L, 321, 347, 409, 410, 420, 430, 446, 202 Etc.


Product Range

Sr. No.
Size (in mm) Thickness
Specification
Manufacturer
1 1000 x 2000 
1220 x 2440 
(4' x 8')
1250 x 2500 
1500 x 3000 To 6000 
2000 x 4000 To 6000
0.3 mm To 120 mm A - 240 Jindal
Sail
Shah Alloys 
Imported Etc.

Specifications
Standards Designation
ASTM A 240
ASME SA 240

Omposition
Typical compositional ranges for grade 304 stainless steels are given in table 1.

Composition Ranges for 304 hr grade stainless steel Sheets & Plates

Grade
C
Mn
Si
P
S
Cr
Mo
Ni
N
304 min.
max.

-
0.08

-
2.0

-
0.75

-
0.045

-
0.030

18.0
20.0

-

8.0
10.5

-
0.10

304L min.
max.
-
0.030

-
2.0

-
0.75

-
0.045

-
0.030

18.0
20.0

-

8.0
12.0

-
0.10

304H min.
max.

0.04
0.10

-
2.0

-
0.75

-0.045

-
0.030

18.0
20.0

-

8.0
10.5

-


Mechanical Properties
Typical mechanical properties for grade 304 stainless steels Plates & Sheets are given in table 2.

Mechanical properties of 304 hr grade stainless steel Sheets & Plates

Grade
Tensile Strength (MPa) min
Yield Strength 0.2% Proof (MPa) min
Elongation (% in 50mm) min
Hardness
Rockwell B (HR B) max
Brinell (HB) max
304
515
205
40
92
201
304L
485
170
40
92
201
304H
515
205
40
92
201

304H also has a requirement for a grain size of ASTM No 7 or coarser.

Physical Properties

Typical physical properties for annealed grade 304 stainless steels are given in table 3.

Physical properties of 304 hr grade stainless steel in the annealed condition

Grade
Density (kg/m3)
Elastic Modulus (GPa)
Mean Coefficient of Thermal Expansion (μm/m/°C)
Thermal Conductivity (W/m.K)
Specific Heat 0-100°C (J/kg.K)
Electrical Resistivity (nΩ.m)
0-100°C
0-315°C
0-538°C
at 100°C
at 500°C
304/L/H
8000
193
17.2
17.8
18.4
16.2
21.5
500
720

Grade Specification Comparison
Approximate grade comparisons for 304 stainless steels are given in table 4.

Grade specifications for 304 hr grade stainless steel

Grade
UNS No
Old British
Euronorm
Swedish SS
Japanese JIS
BS
En
No
Name
304
S30400
304S31
58E
1.4301
X5CrNi18-10
2332
SUS 304
304L
S30403
304S11
-
1.4306
X2CrNi19-11
2352
SUS 304L
304H
S30409
304S51
-
1.4948
X6CrNi18-11
-
-

These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.

Possible Alternative Grades
Possible alternative grades to grade 304 stainless steels are given in table 5.

Possible alternative grades to 304 hr grade stainless steel

Grade Why it might be chosen instead of 304
301L A higher work hardening rate grade is required for certain roll formed or stretch formed components.
302HQ Lower work hardening rate is needed for cold forging of screws, bolts and rivets.
303 Higher machinability needed, and the lower corrosion resistance, formability and weldability are acceptable.
316 Higher resistance to pitting and crevice corrosion is required, in chloride environments
321 Better resistance to temperatures of around 600-900°C is needed…321 has higher hot strength.
3CR12 A lower cost is required, and the reduced corrosion resistance and resulting discolouration are acceptable.
430 A lower cost is required, and the reduced corrosion resistance and fabrication characteristics are acceptable.

OTHER GRADES OF STAINLESS STEEL 304 / 304L SHEETS PLATES

Stainless Steel 304 Sheets Plates
Stainless Steel 304L Sheets Plates
SS 304 Sheets Plates
SS 304L Sheets
Stainless Steel UNS S30400 Plates
SS UNS S30403 Sheets Plates
Stainless Steel Din 1.4306 Plates
SS Din 1.4307 Sheets


304 hr Stainless Steel Plates and Sheets Packing

304 hr Stainless Steel Plates and Sheets is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation. SS 304 Stainless Steel Plate packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.

Delivery: Within 10-25 days or asap if we have enough stock


Types of Packaging:

  • - Bundles (hexagonal)
  • - Wooden Boxes
  • - Crates (steel/wooden)
  • - Special crates for U-Bend tubes with each radius separated
  • - Packaging for SS 304 Stainless Steel Plate ASTM A240 as per customer's requirements


Special Features:

  • - Each bundle covered with plastic for protection against extreme weather.
  • - End of 304 Stainless Steel Plate protected by plastic Strip.
  • - Bundles strapped with plastic strips.
  • - Each radius of U-Bend tube separated by a separator.
  • - Packaging list (laminated) placed with box/crate.


Stockholder, Suppliers of Stainless Steel 304/304L Sheets

“Yes, It’s in Stock and Ready to Deliver”
High Quality, Lower Cost But The Best Service in Steel Plates
304 Stainless Steel Plates and Sheets Available with Stock Sizes:

  • 0.2 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 0.3 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 0.4 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 0.8 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 1 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 1.65 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 2.11 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 3.1 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 04 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 05 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 06 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 08 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 10 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 12 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 15 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 16 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 18 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 20 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 22 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 25 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 28 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 30 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 32 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 35 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 36 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 38 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 40 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 42 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 45 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 50 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 52 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 60 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 62 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 65 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 70 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 80 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 90 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 100 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 110 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 120 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet
  • 120 MM THICKNESS x WIDTH 10000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A240 TP 304 Stainless Steel Plates, 304 Stainless Steel Plate, SS 304 Plate, 304 Stainless Steel Sheet


Ready Inventory at Philips Metal:










We export 304 hr Stainless Steel Plates to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc.

Philips Metal is a well known worldwide exporter of 304 hr Stainless Steel Plates, Philips Metal is committed to provide each and every customer with the highest standard of customer service. We deals in 304 hr Stainless Steel Plates in India & Overseas, offering a wide range of 304 hr Stainless Steel Plates.

Philips Metal is Leading Manufacturer, Distributor, Exporter, Stockholder and Supplier of 304 Stainless Steel Plates in United States of America (USA), Saudi Arabia, Iran, Iraq, United Arab Emirates (UAE), Singapore, Malaysia, Indonesia

Stainless Steel 304 Plates, Stainless Steel 304L Plates, SS 304 Plates, Stainless Steel UNS S30400 Plates, SS UNS S30403 Plates, Stainless Steel Din 1.4306 Plates, SS Din 1.4307 Sheets