Philips Metal Industries india is most Specialist Supplier,Exporter & Fabricator of Stainless Steel 317L Pipes & Tubes,our strength is in Stainless Steel 317L Seamless Pipe,SS 317L ERW Pipe, SS 317L Welded Pipe,SS 317L Fabricated Pipe,SS 317 L LSAW Pipe,317L (UNS S31703) stainless steel tubing is used in applications that require superior corrosion resistance to 304L and 316L stainless steel tubing. Alloy 317L stainless steel tubing is a more corrosion resistant austenitic relative of alloy 316L, due to the additional percentage of molybdenum,Alloy 317L stainless steel tubing can be hardened by cold working, not by heat treating.
This tough alloy is subject to work hardening during machining,Due to its low carbon content, alloy 317L stainless steel tubing can be welded without risk of sensitisation, alloy 317L stainless steel tubing improved resistance to chlorides and other halides, particularly, and makes it a strong candidate for use in offshore applications or in processing applications such as pulp and paper processes that contain such corrosive environments.alloy 317L tubing provides higher creep, stress-to-rupture, and tensile strength at elevated temperatures than conventional stainless steel tubes,317L is non-magnetic in the annealed condition however could become slightly magnet due to welding.317L possesses outstanding corrosion resistance in a wide range of chemical substances,317L is resistant against sulfuric acid concentration approximately 5 % at temperature up to 120°F (49°C).
At temperature under 100°F (38°C) this alloy has outstanding resistance to solutions of high concentration, 317L is a lot more resistant against attack at the point of condensation compared to common alloy 316L, Philips Metal Industries already established our sales network by appointing our dealers & distributors in Malaysia, Nigeria, Egypt, South Africa, Tanzania, Kenya, Algeria, Sudan, Uganda, Morocco, Ghana,
Mozambique, Angola, Gabon,Russia, Germany, Turkey, France, United Kingdom, Italy, Spain, Netherlands,
Iran, Iraq, Saudi Arabia, United Arab Emirates, Israel, United Kingdom, Jordan, Oman, Kuwait, Qatar, Bahrain, Bangladesh, China, Indonesia, Japan, South Korea, Philippines, Singapore,Thailand, Vietnam, Brazil, Colombia, Argentina, United States, Mexico, Canada & Australia.
ASTM A312 TP317L Stainless Steel Seamless Pipe, UNS S31703 Seamless Pipe, WNR 1.4438 Seamless Tubes Supplier in INDIA,317L Seamless & Welded Pipe and Tubes: ASTM A312, ASTM A213, ASTM A249
Why Philips Metal Industries is best supplier of Stainless Steel Seamless 317L Pipes & Tubes?
Short Delivery Times – We are the quickest bcz. Philips Metal Industries is the larges Stockist of SS 317L pipes in ASIA.
Best Prices: Philips Metal Industries is associated with world’s top 15 leading mills & lift up SS 317 Piping Materials in bulk quantity with Spot payment,so no other supplier can compete in SS 317L Tubes & pipes Pricing Our prices for stainless steel 317L pipes are competitive.
High Grade Quality: We procure only high grade quality of SS 317L pipes and tubes after 3 level testing & supply SS 317L materials along with test reports
Certification of SS 317L piping Materials: Philips Metal Industries is the only company in INDIA supply SS 317L Pipes & tubes with complete documents start from raw material origin to final dispatch to our stockyard,Mill TC, Test Reports from NABL approved Labs, Hydro Testing reports etc.
Complete Documentation: For our overseas customers in the west Africa,South Africa,Middle East, GCC region, South Amercia and Asia region we export SS 317L grade Pipes & Tubes with complete documents including Invoice, Packing List, Mill Test Certificates, Certificate of Origin and bill of lading
Special Offer on surplus stock of Stainless Steel 317LSeamless Pipes below Schedule:
SS 317 L SCH20 Pipe, SS 317L SCH30 Pipe , SS 317L SCH40 Pipe, SS 317L STD Pipe,SS 317L SCH80 Pipe, SS 317L SCH XS Pipe, SS 317L SCH60 Pipe, SS 317L SCH80 Pipe, SS 317L SCH120 pipe, SS 317L SCH140 Pipe, SS 317L SCH160 Pipe, SS 317L SCH XXS Pipe
Philips Metal Industries stocking full range of Stainless Steel 317L piping Materials as being a largest Stockist/Stockholder of Stainless Steel 317L pipes & tubes we receive urgent requirements of 317L material,we maintain ready stock of minimum 1200 ton of Stainless Steel 317L Seamless Pipes & Tubes,this is the largest live stock in ASIA of of 317L Pipes & tubes,“no one stock this much size range in Stainless Steel Seamless 317L Pipes like Philips pipes” SS 317 Material is stocked in the annealed and pickled, bright annealed, mill finish and polished conditions, Stainless steel 316L pipe is available in a wide range of finishes including hot rolled, annealed, matte finish, reflective finish & mirror finish,we only supply high grade quality of 317L stainless steel pipe and SS 317L tubing that is sized, cut, and finished according to specifications of our clients,317L pipe and tubing is available with ODs from 0.250″ to 8.000″ with wall thickness from 0.020″ to 0.250″.Philips Metal Industries Exporting yearly around 1200 ton SS 317L pipes & Tubes to more than 40 countries, Philips Metal Industries is largest Stockist & supplier in INDIA of Stainless Steel 317L Electropolished Pipes & tubes
317L Stainless Steel
317L is a molybdenum bearing austenitic chromium nickel steel similar to type 316, except the alloy content in 317L is somewhat higher. It has a superior corrosion resistance in special applications, SS 317L was developed primarily to resist more effectively the attack of sulfurous acid compounds. The low carbon content of 317L provides immunity to intergranular corrosion in applications where low temperature stress relieving treatments are desired.
Stainless Steel 317L Seamless Pipes & Tubes in Ready Stock:
Seamless Pipe 1/2″ – 8″
Weld Pipe 1/2″ – 12″
SS 317L pipe
stainless Steel 317L tubes
AISI 317L seamless pipe
ASTM A269 TP317L stainless steel seamless tubes
Stainless Steel 317L pipe
ss 317L tubes
AISI 317L welded pipe
ASTM A213 TP 317L stainless steel seamless tubes
UNS S31703 Pipe
AISI 317L seamless tubes
SUS 317L Pipe
AISI 317L welded tubes
ASTM A312 TP 317L stainless steel welded pipe
SUS 317L Tubes
AISI 317L ERW pipe
ASTM A249 TP 317L stainless steel welded tubes
DIN 1.4438 pipe
AISI 304 ERW tubes
ASTM A312 TP 304 stainless steel seamless pipe
AISI 317L Stainless steel pipe
DIN 1.4438 Tubes
AISI 317L EFW pipe
ASTM A358 TP 317L stainless steel EFW Tubes
SS 317L Welded and Seamless Tubes, Pipes
SS 317L Hydraulic and Instrumentation Tubes
SS 317L Coiled Tubing
SS 317L Capillary Tubes
SS 317L Seam Welded and Cold Redrawn Pipe and Tubes
SS 317L Seam Welded, Cold Redrawn and Annealed Pipes and Tubes
0.375″ NOM. (0.675″ OD X 0.091″ WALL X 0.493″ ID) STAINLESS T-316/316L WELDED PIPE SCHEDULE 40
0.5″ NOM. (0.84″ OD X 0.11″ WALL X 0.622″ ID) STAINLESS T-316/316L WELDED PIPE SCHEDULE 40
1″ NOM. (1.312″ OD X 0.13″ WALL X 1.049″ ID) STAINLESS T-316/316L WELDED PIPE SCHEDULE 40
1.25″ NOM. (1.66″ OD X 0.14″ WALL X 1.38″ ID) STAINLESS T-316/316L WELDED PIPE SCHEDULE 40
1.5″ NOM. (1.9″ OD X 0.145″ WALL X 1.61″ ID) STAINLESS T-316/316L WELDED PIPE SCHEDULE 40
2″ NOM. (2.38″ OD X 0.15″ WALL X 2.067″ ID) STAINLESS T-316/316L WELDED PIPE SCHEDULE 40
2.5″ NOM. (2.875″ OD X 0.203″ WALL X 2.469″ ID) STAINLESS T-316/316L WELDED PIPE SCHEDULE 40
3″ NOM. (3.5″ OD X 0.216″ WALL X 3.068″ ID) STAINLESS T-316/316L WELDED PIPE SCHEDULE 40
3.5″ NOM. (4″ OD X 0.226″ WALL X 3.548″ ID) STAINLESS T-316/316L WELDED PIPE SCHEDULE 40
4″ NOM. (4.5″ OD X 0.237″ WALL X 4.026″ ID) STAINLESS T-316/316L WELDED PIPE SCHEDULE 40
5″ NOM. (5.563″ OD X 0.258″ WALL X 5.047″ ID) STAINLESS T-316/316L WELDED PIPE SCHEDULE 40
6″ NOM. (6.625″ OD X 0.28″ WALL X 6.065″ ID) STAINLESS T-316/316L WELDED PIPE SCHEDULE 40
8″ NOM. (8.625″ OD X 0.322″ WALL X 7.981″ ID) STAINLESS T-316/316L WELDED PIPE SCHEDULE 40
Stainless Steel 317 (UNS S31700) is a molybdenum-bearing austenitic stainless steel with greatly increased resistance to chemical attack as compared to the conventional chromium-nickel austenitic stainless steel pipe such as SS 304 and SS 316L. In addition. SS 317 offers higher creep, stress-to-rupture, and tensile strength at elevated temperatures than conventional stainless steel tubing. Stainless Steel 317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.
ASTM A312 TP 317L Stainless Steel Seamless Pipe Test Certificate
Delivery: Within 10-25 days. Urgent order also accepted.
We have a full range of expertise for Export Packing. We can pack ASTM A312 TP 317L Stainless Steel Seamless Pipe so that they arrive ready for use in perfect condition. If required we arrange for packaging (also for sea freight), supply plastic caps or protection rings at the pipe ends and organise special marking.
Our team of project coordinators communicates all relevant facts about inspection, testing and quality control and assures ASTM A312 TP 317L Stainless Steel Seamless Pipe will be supplied against the agreed terms for packaging and transportation. All materials can be prepared for shipping by truck, by bulk vessel or container vessel.
ASTM A312 TP 317L Stainless Steel Seamless Pipe Packing Standard 01: single pipes wrapped in shrink foil, pipe ends protected with foil or plastic caps, wooden beams between each pipe layer, bundles secured with plastic strapping.
ASTM A312 TP 317L Stainless Steel Seamless Pipe Packing Standard 02: single pipes wrapped in shrink foil, pipe ends protected with foil or plastic caps, frame construction made of wood, both front-sides closed, frame construction secured with steel strapping.
ASTM A312 TP 317L Stainless Steel Seamless Pipe Packing Standard 03: single pipes wrapped in shrink foil, pipe ends protected with foil or plastic caps, reinforced frame construction made of wood, both front-sides closed, frame construction secured with steel strapping.
ASTM A312 TP 317L Stainless Steel Seamless Pipe Packing Standard 04: single pipes wrapped in shrink foil, pipe ends protected with foil or plastic caps, wooden box with frame construction, completely closed, box secured with steel strapping.
Specifications: ASTM A/ASME SA213/A249/A269/A312/A358 CL. I to V ASTM A789/A790
Sizes (Seamless): 1/2″ NB – 24″ NB
Sizes (ERW): 1/2″ NB – 24″ NB
Sizes (EFW): 6″ NB – 100″ NB
Wall Thickness available:
Schedule 5S – Schedule XXS (heavier on request)
Other Materials Testing:
NACE MR0175, H2 SERVICE, OXYGEN SERVICE, CRYO SERVICE, etc.
All Pipes is manufactured and inspected/tested to the relevant standards including ASTM, ASME and API etc.
317L Stainless Steel Seamless Tube
Philips Metal Industries supplies stainless steel seamless tube per ASTM A 213, ASTM A 269 and ASTM A 511. We supply common grades of stainless steel such as 317/ 317L, 304/304L, 316/317L in standard tube sizes and wall thicknesses. We can also supply more challenging stainless steel and nickel seamless tubing in 304H, 309/S, 310/S, 317/L, 321H, 347H, Alloy 20, Duplex 2205, Duplex 2507, Alloy 200/201, C276, Alloy 400, Alloy 600, Alloy 625, Alloy 800H, Alloy 800HT, 254SMO, AL6XN and others. We also supply seamless stainless steel hollow bar for machining applications with wall thicknesses in excess of 2″ for some stainless grades. Most sizes of seamless stainless steel and nickel tube can be cut to exact sizes. Non standard sizes can be made to order. Contact a sales associate today for your exact seamless nickel or stainless steel tubing requirement.
Diameter of 317L Stainless Steel Tube: 1/16″ thru 14″ / light and heavy wall thickness available
317 / 317L Stainless Steel Hollowbar Tubing
Generally known as hollow bar, 317 / 317L seamless mechanical tubing is generally used for mechanical and machining applications. This tubing can be cut to your exact requirements.
Stock size range:
OD: 1.250″ OD through 9″ OD
Walls: .188″ wall through 1.00″ wall
Specifications: ASTM A511, ASTM A269
317L Stainless Steel Seamless Tubing
317 / 317L and 304 / 304L stainless steel
Standard instrumentation tubing
1/8 to 2 in. and 3 to 25 mm sizes
Marked to indicate size, material, specifications, and heat code
The following specifications cover Stainless Steel 317L
Allowable working pressures are calculated from an S value of 20 000 psi (137.8 MPa) for ASTM A269 tubing at –20 to 100°F (–28 to 37°C), as listed in ASME B31.3 and ASME B31.1. Tubing nominal length is 20 ft.
SS Seamless Instrumentation Tubes Bright Annealed & Polished
OD 6 TO 25 mm WT 0.7 to 3 mm
ASTM A/SA 213, 269 EN 10216-5
Straight length 6 to 8 m, Coil length up to 50 m
SS Seamless Heat Exchanger & Feedwater Heater Tubes
OD 15.88 to 38.10 mm WT 0.9 to 5 mm
ASTM A/SA 213, 269, 789, EN 10216-5
Length up to 30 m & ‘U’ Tubes 1.5 D to 2.0 m
SS Seamless Boiler Tubes
OD 38.1 to 76.10 mm WT 3 to 6mm
ASTM A/SA 213, EN 10216-5
Length 10 to 12 m
SS Seamless Hollow Bars
OD 32 to 80 mm ID 20 to 60 mm
ASTM A 511 EN 10216-5
Length 2.50 to 6 m subject to hollow bar size
SS Seamless Process Pipes
½” to 6” NB Sch 10s, 40s, & 80s
ASTM A/SA 312, ASTM 790
Single random length 5to7 m or Double random length 10-12m
317L Stainless Steel Seamless Round Tubing
316/317L seamless stainless steel round tubing is suitable for transport of fluids and gases in chloride environments
0.125″ OD x 0.028″ WALL x 0.069″ ID T-316/317L SEAMLESS TUBE
0.1875″ OD x 0.028″ WALL x 0.1315″ ID T-316/317L SEAMLESS TUBE
0.1875″ OD x 0.035″ WALL x 0.1175″ ID T-316/317L SEAMLESS TUBE
0.1875″ OD x 0.049″ WALL x 0.0895″ ID T-316/317L SEAMLESS TUBE
0.25″ OD x 0.02″ WALL x 0.21″ ID T-316/317L SEAMLESS TUBE
0.25″ OD x 0.028″ WALL x 0.194″ ID T-316/317L SEAMLESS TUBE
0.25″ OD x 0.035″ WALL x 0.18″ ID T-316/317L SEAMLESS TUBE
0.25″ OD x 0.049″ WALL x 0.152″ ID T-316/317L SEAMLESS TUBE
0.25″ OD x 0.065″ WALL x 0.12″ ID T-316/317L SEAMLESS TUBE
More seamless Tube (Size in Inches)
317L Stainless Steel Seamless Square Tubing
317 / 317L stainless tube is available as square shape. It is available as welded and seamless. It contains additional molybdenum and nickel than 304 stainless, which increases corrosion resistance of the metal. Decreased weldability is exhibited in 317L alloys due to increased carbon in the alloy. It is used for tube in more aggressive environments than 304 tube.
317L Seamless Square Tubing Sizes: 1/2” to 6” X 20’ Randoms
317L Stainless Steel Seamless rectangular Tubing
317 / 317L stainless tube is available as rectangular shape. It is available as welded and seamless. It contains additional molybdenum and nickel than 304 stainless, which increases corrosion resistance of the metal. Decreased weldability is exhibited in 317L alloys due to increased carbon in the alloy. It is used for tube in more aggressive environments than 304 tube.
317L Seamless rectangular Tubing Sizes: 1/2” to 6” X 20’ Randoms
Stainless Steel 317L Industrial Metal Tubing
Part of the austenitic family of stainless steel, both 316 and 317L stainless ornamental tubing contain slightly more nickel than T304/304L, as well as 2-3% molybdenum. This allows for better corrosion resistance than T304, especially in environments that tend to cause pitting. It is widely used in the chemical processing industries.
We distributes 317L stainless steel tubing alloyed with titanium. Featuring pressure rating up to 700 bar, the tubing is available in sizes from 3 to 25mm outside diameter. Seamless 316 stainless steel tubing supplied by Philips Metal Industries meet AMS 5573 specifications
Stainless Steel 317L Seamless Coiled Tubing
We maintain the largest inventory of instrumentation coiled tubing, both seamless and welded.
Philips Metal Industries stocks only tubular products produced by mills compliant with ISO manufacturing standards. As a result, should your requirement be for welded or seamless product produced domestically or overseas, you will always be confident that your requirements for product quality will be met or exceeded on every shipment.